VGA to CAT5 extenders convert a computer display signal (15 pin Dsub connection) in to a signal that can be used with low cost network cable and that allows you to send the signal over a hundred metres cable distance.
Most VGA to CAT5 extenders require the use of a transmitter to convert the computer signal in to CAT5 form and a corresponding receiver to convert signal back again so it can be used in a regular computer display.
The GA11R/A receiver takes a CAT5 signal from the GA11T/A transmitter and converts it back to VGA and PC audio up to 150m away via CAT 5 unshielded twisted pair cables.
The ABtUS CAT-GA111R/AP3 is a receiver that accepts signals resolution up to 1920 x 1200. It comes with a built-in Enhanced Skew Compensation as well as Level and EQ Adjustments
The ABtUS AVA GA11MT is a CAT-5 extender that accepts long distance transmissions of RGB video with stereo audio on any CAT 5e UTP, 5e STP or CAT 6 twisted pair up to 300 metres end to end (up to 500 metres with receiver loop-out).
The ABtUS CAT5-GA14T/A splits computer video and pc audio into 4 identical outputs and transmit up to 150m via CAT 5 unsheilded twisted pair (UTP) cables.
The ABtUS CAT-RGB212T/AP is a distribution amplifier extender system that allows either 1 of the 2 video signal/stereo audio to be sent to multiple displays (max 12) up to 300m.
